Quality Custom Audio Visual Imports

Back to the MAD Distribution Home Page








Flatline Acoustics USA Australia - FL-525-IC

FL-525-IC

Woofer: 5.25", PP cone with mica, rubber surround, 18 oz magnet, 1" voice coil, vented pole piece
Tweeter: 1" mylar dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
Crossover: FR4 PCB board, 12dB woofer section, 12dB tweeter section
Polymide auto protective reset switch for tweeter
Gold plated terminal posts will accept 14AWG wire
Frequency response: 55Hz-22KHz
Sensitivity: 87dB
Recommended amplifier power: 10-100 watts
Impedance: 8ohm
Cut out size: 168 mm
Depth: 95 mm

Flatline Acoustics USA Australia - FL-650-IC

FL-650-IC

Woofer: 6.5", PP cone with mica, rubber surround, 22 oz magnet, 1" voice coil, vented pole piece
Tweeter: 1" mylar dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
Crossover: FR4 PCB board, 12dB woofer section, 12dB tweeter section
Polymide auto protective reset switch for tweeter
Gold plated terminal posts will accept 14AWG wire
4ohm/8ohm switchable on PCB
Frequency response: 48Hz-22KHz
Sensitivity: 88dB
Recommended amplifier power: 10-125 watts
Impedance: 4ohm/8ohm switchable
Cut out size: 202mm
Depth: 104mm

Flatline Acoustics USA Australia - FL-650-IC

FL-8300-IC

Woofer: 8", PP cone with mica, rubber surround, 25 oz magnet, 1.25" voice coil, vented pole piece
Midrange: 3" PP cone with mica, rubber surround
Tweeter: 1" mylar dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
Crossover: FR4 PCB board, 12dB woofer section, 12dB midrange section, 12dB tweeter section
Separate polymide auto protective reset switch for tweeter and midrange
Gold plated terminal posts will accept 14AWG wire
4ohm/8ohm switchable on PCB
Frequency response: 40Hz-22KHz
Sensitivity: 89dB
Recommended amplifier power: 10-150 watts
Impedance: 4ohm/8ohm switchable
Cut out size: 244mm
Depth: 120mm

Flatline Acoustics USA Australia - FL-650-IC

FL-650-IW

Woofer: 6.5", PP cone with mica, rubber surround, 1" voice coil, 22 oz magnet, vented pole piece
Tweeter: 1" teterone dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
Crossover: FR4 PCB board, 12dB woofer section, 12dB tweeter section
Polymide auto protective reset switch for tweeter
Gold plated terminal posts will accept 14AWG wire
4ohm/8ohm switchable on PCB
Frequency response: 48Hz-22KHz
Sensitivity: 88dB
Recommended amplifier power: 10-125 watts
Impedance: 4ohm/8ohm switchable
Cut out size: 280mm x 192mm
Depth: 97mm

Flatline Acoustics USA Australia - FL-650-IC

FL-8300-IW

Woofer: 8", PP cone with mica, rubber surround, 1.25" voice coil, 25 oz magnet, vented pole piece
Midrange: 3" PP cone with mica, rubber surround
Tweeter: 1" teterone dome, swivel 30 degrees, ferro-fluid cooled, neodymium magnet, wide dispersion
Crossover: FR4 PCB board, 18dB woofer section, 12dB midrange section, 12dB tweeter section
Separate polymide auto protective reset switch for tweeter and midrange
Gold plated terminal posts will accept 14AWG wire
4ohm/8ohm switchable on PCB
Punch out in baffle for infrared sensor control
Frequency response: 45Hz-22KHz
Sensitivity: 89dB
Recommended amplifier power: 10-150 watts
Impedance: 4ohm/8ohm switchable
Cut out size: 330 mm x 229 mm
Depth: 97 mm



Warranty

We are 100% committed to customer satisfaction and offer a 5 year manufacturer supported replacement warranty on our entire flush speaker range of products.

All Flatline Acoustics speakers feature Stainless Steel screws and anodised aluminium grilles for enhanced moisture & corrosion resistance.



Flatline Acoustics USA quality assurance includes: